- 您现在的位置：买卖IC网 > Sheet目录266 > 0194021000 (Molex Inc)CONN 12-14AWG TAP SPLICE
COC-3 Self Contained Power Connector Installation Instructions
For Tap Splice
The 2-circuit-with-ground tap connector is used to tap non-metallic-sheathed cable in the following wire
ranges and types:
Wire Optional
Range Bench Optional
AWG Description Order No. Arbor Press Hand Tool
12-14 Self Contained Power Tap Connector - 2 circuit w/ ground for solid wire 19402-1000 (COC-3) 64006-0200
19285-0074
Reference Information
UL File Number: E182087
CSA File Number: LR18689-C53
NEC Article: 550, 551, and 545
HUD Section: 3280.801
Current: 20A
Voltage: 300V
Installation Procedure:
1. Carefully strip sheath and paper coverings and prepare the wires to the configuration as
shown in Figure 1. For reference in the absence of a measuring tool, the distance shown in
Figure 1.1 is approximately equal to strip length.
2. Hold the clear strain relief cover with bottom facing upward as shown in Figure 2.
3. Lay wire into locator slots, making sure the black wire is placed into locator slots marked BLK
shown in Figure 2. Use the two wire locators and spreaders to help guide the wire into
place. Press the cable sheath into the integral strain relief slot.
4. While holding the strain relief cover, position the housing’s hinge posts into the hinge slots
and press down until both lock into place as shown in Figure 2.
5. Close the strain relief cover and housing by hand . Place the connector assembly into Molex tool
as shown in Figure 3. Squeeze the tool until the connector bottoms out and the locking latches
engage on both sides. OR alternately, squeeze the top and bottom closed with tongue and
groove pliers as shown in Figure 3.1 . Pliers must be a minimum of 10" long. Squeeze firmly on
both sides, squarely across the connector with the bottom jaw of the pliers butted up against the
T-extension in the housing to ensure wires seat completely into slots.
6. Inspect the connector to ensure the wires have been properly engaged into the housing
assembly contacts. A properly terminated wire is fully seated into its proper slots with no
significant bow of the cover. If the wires are not properly seated into the housing assembly
contacts, the wires must be re-terminated with a NEW CONNECTOR. Once the cover has
been closed the connector cannot be re-used. Failure to comply with this procedure may
result in the failure of the connector.
19402-1004 REV D
发布紧急采购，3分钟左右您将得到回复。
相关PDF资料
0194030011
SC POWER CONN 14AWG RND CBL
0194031300
POWER CONN 10 AWG 194031300
0194031310
SC POWER CONN 14AWG RND CBL TIN
0194210001
SC POWER CONNECTOR 12AWG ROUND
0194210002
SC POWER CONN 12AWG BLUE COVER
02KR-8M-P
CONN RECEPT IDC 2POS 2.0MM
0358972410
040/090 MALE HSG 24POS
0359770590
CONN 3.96 W/B HOUSING 5POS
相关代理商/技术参数
0194021010
制造商:Molex 功能描述:12 SCPC TAP STRANDED
0194021011
制造商:Molex 功能描述:14-16 SCPC TAP STRANDED
0194025000
制造商:Molex 功能描述:CROSS OVER CONNECTOR CAP (194025000) - Bulk
0194030005
制造商:Molex 功能描述:MALE WATERPROOF END CAP ASSEMBLY - Bulk
0194030011
功能描述:SC POWER CONN 14AWG RND CBL RoHS:是 类别:连接器，互连式 >> 矩形 - 自由悬挂，面板安装 系列:* 标准包装:50 系列:AMPMODU 系统 50 连接器类型:插座 触点类型：:母形插口 位置数:34 间距:0.050"（1.27mm） 行数:2 行间距:0.100"（2.54mm） 安装类型:自由悬挂 紧固型:销锁 电缆端接:IDC 导线类型:带状缆线 线规:30-32 AWG 特点:馈通 触点表面涂层:金 触点涂层厚度:30µin（0.76µm） 颜色:黑 包装:散装
0194031010
功能描述:SELF CONTAINED POWER CONN 12GA RoHS:是 类别:连接器，互连式 >> 矩形 - 自由悬挂，面板安装 系列:* 标准包装:50 系列:AMPMODU 系统 50 连接器类型:插座 触点类型：:母形插口 位置数:34 间距:0.050"（1.27mm） 行数:2 行间距:0.100"（2.54mm） 安装类型:自由悬挂 紧固型:销锁 电缆端接:IDC 导线类型:带状缆线 线规:30-32 AWG 特点:馈通 触点表面涂层:金 触点涂层厚度:30µin（0.76µm） 颜色:黑 包装:散装
0194031011
功能描述:SELF CONTAINED POWER CONN 16-14 RoHS:是 类别:连接器，互连式 >> 矩形 - 自由悬挂，面板安装 系列:* 标准包装:50 系列:AMPMODU 系统 50 连接器类型:插座 触点类型：:母形插口 位置数:34 间距:0.050"（1.27mm） 行数:2 行间距:0.100"（2.54mm） 安装类型:自由悬挂 紧固型:销锁 电缆端接:IDC 导线类型:带状缆线 线规:30-32 AWG 特点:馈通 触点表面涂层:金 触点涂层厚度:30µin（0.76µm） 颜色:黑 包装:散装
0194031060
制造商:Molex 功能描述:CONN ACC BOOT - Bulk